Zone coating of the adhesive at least 1 mm (0.04 in.) away from edges is recommended. Be sure adhesive backing does not reach to the sheet edge.Do not print within 1 mm (0.04 in.) of the edge of the label, of the perforations, or between die-cuts of the label.Do not use labels with exposed adhesive.Partial sheets also contaminate the printer and the cartridge with adhesive, and could void the printer and cartridge warranties. Partial sheets may cause labels to peel off during printing, resulting in a jam. Do not use labels with slick backing material.Label adhesives, face sheet (printable stock), and topcoats can withstand up to 25-psi (172-kPa) pressure without delaminating, oozing around the edges, or releasing hazardous fumes. Select this setting using the Embedded Web Server, or from the printer control panel Paper menu.Labels can be printed at a higher fusing temperature up to 220☌ (428☏) if Label Weight is set to Heavy.

Check with the manufacturer or vendor to verify that the labels can withstand temperatures up to 210☌ (410☏) without sealing, excessive curling, wrinkling, or releasing hazardous emissions.

Use labels designed specifically for laser printers.

Here are some tips when printing on labels: This printer has capability to print on labels.

Title strips for jukeboxes template